Call (470) 600-8544

How much does a new fence cost in Cherokee County?

Fence prices are quoted per linear foot, installed. Published Atlanta-area guides put most residential fences somewhere between about $12 and $50 a foot depending on material. Here's how to estimate your project and compare quotes.

  • Free to use, with no obligation to hire
  • Independent fence contractors that work in Cherokee County
  • You get the quote from the provider and deal with them directly

Get a free fence quote

Free, no obligation. Takes about a minute.

Typical installed price per foot

These ranges come from published Atlanta-area cost guides and vary between sources, so use them for budgeting only. Chain link: roughly $12 to $30 a foot. Wood privacy (6 ft, pine): roughly $22 to $48 a foot, with cedar higher. Aluminum (4 ft ornamental): roughly $28 to $60 a foot. Vinyl privacy (6 ft): roughly $28 to $58 a foot.

To estimate, measure the length of the fence line in feet and multiply by a range for your material. Then add gates, which are priced separately.

What changes the price

Length and height: more feet and taller panels cost more. Gates: each walk gate or double drive gate adds to the total. Terrain: slopes, rocky ground and Cherokee County's hard red clay can slow post-setting. Old fence removal: tearing out and hauling away an existing fence is usually extra. Access: tight backyards and long carries add labor.

Permits, HOAs and property lines

Fence permit rules depend on where you live. Unincorporated Cherokee County and the cities (Woodstock, Canton, Holly Springs, Ball Ground, Waleska) each have their own rules on height and placement, especially near roads. If you're in a neighborhood with an HOA, get written approval before work starts, since many HOAs restrict height, style and color. Know where your property line is, and call 811 before digging so buried utilities get marked.

How to compare quotes

Ask each company for a written, itemized quote: linear feet, height, material grade, post spacing and how posts are set, gates, removal and haul-away, and who handles permits and HOA paperwork. Ask about the warranty on workmanship, and for proof of insurance.

Good to know: Get at least two quotes on the same specs (same length, height, material and gates). That's the only way to compare prices fairly.

How it works

We connect you with vetted local independent pros. We're a referral service, not a contractor, so we never quote prices or do the work ourselves.

  1. Tell us about the job

    Call or send the form with your address and what you need. It's free and you're not committing to anything.

  2. We match you with a local pro

    We pass your request to a vetted, independent fence contractor who works in your part of Cherokee County.

  3. Compare and decide

    The provider contacts you to look at the job and give a quote. You decide whether to hire them, and you deal with them directly.

Fence installation cost: common questions

What's the cheapest fence option?

Chain link is usually the least expensive per foot. Wood privacy is the most common choice for backyards when privacy matters.

Why is my quote higher than the online averages?

Slopes, rock, gates, old fence removal and material grade can all push a job above published averages. Ask the company to break down the price.

Do you charge homeowners?

No. Our matching service is free. You get the quote from, and pay, the fence company directly.

Get a fence quote

Free, no-obligation matching with an independent local fence contractor.

Call nowFree quote